How to Get Windows 8.1 to Read Fat32

This guide shows you how to set a corrupted registry for the following Windows versions: Windows XP, Vista, 7, viii, 8.1, or 10.

Contents

• 1 Fix a corrupt registry in Windows XP
• 2 Set a corrupt registry in Windows Vista
  • two.1 Startup Repair
  • 2.2 Upgrade Install
  • 2.3 Command Prompt
• 3 Fix a corrupt registry in Windows 7
  • 3.1 Startup Repair
  • 3.2 Upgrade Install
  • three.three Command Prompt
• 4 Fix a corrupt registry in Windows 8 or 8.1
  • iv.ane Run Automatic Repair
  • iv.ii Refresh
  • 4.3 Reset
• 5 Set a corrupt registry in Windows 10
  • 5.one Run Automatic Repair
  • 5.2 Refresh
  • 5.three Reset
• 6 Troubleshooting
  • vi.1 Registry permissions in Windows XP
• 7 More Information
  • 7.1 Support Links
  • seven.two Applicative Systems

Fix a decadent registry in Windows XP

To prepare a corrupt registry on a Windows XP system, follow these instructions:

1. Insert the Windows XP setup CD and restart the reckoner
2. Press any central to boot from the CD
3. Press R to access Repair Panel
4. Enter the Administrator password. When the Command Prompt appears, blazon the post-obit commands, one at a time and press Enter later on each command, replacing C: with the Windows' bulldoze letter:

   md tmp copy c:\windows\system32\config\system c:\windows\tmp\organization.bak copy c:\windows\system32\config\software c:\windows\tmp\software.bak re-create c:\windows\system32\config\sam c:\windows\tmp\sam.bak re-create c:\windows\system32\config\security c:\windows\tmp\security.bak copy c:\windows\system32\config\default c:\windows\tmp\default.bak

   

   Bankroll upwards electric current registry hives

   delete c:\windows\system32\config\system delete c:\windows\system32\config\software delete c:\windows\system32\config\sam delete c:\windows\system32\config\security delete c:\windows\system32\config\default

   

   Deleting electric current registry hives

   copy c:\windows\repair\system c:\windows\system32\config\system copy c:\windows\repair\software c:\windows\system32\config\software copy c:\windows\repair\sam c:\windows\system32\config\sam copy c:\windows\repair\security c:\windows\system32\config\security copy c:\windows\repair\default c:\windows\system32\config\default

   

   Restoring registry hives from a repair folder

5. Type exit and remove your CD:

   go out

6. Printing Enter
7. Restart your computer
8. Boot into Safe Mode by repeatedly pressing the F8 key later on booting until the Startup Options menu appears
9. Cull to boot into Safe Manner
10. Start Windows Explorer (or open whatsoever folder or open My Computer)
11. Click Tools
12. Click Folder Options
13. Go to the View tab
14. At the Nether hidden files and folders, select Evidence subconscious files and folders and then click the Hide protected operating system files (Recommended) check box to be cleared (unchecked)
15. Click Aye to confirm these deportment

    

    Windows XP show hidden files screen

16. Become to My Computer > C:\ drive or the bulldoze where you installed your Windows
17. Click on the System Volume Information folder.If y'all receive Access denied, please follow these guidelines to get access to that folder: https://neosmart.net/wiki/how-to-gain-access-to-the-system-five….
    Y'all're most likely to receive Access denied if your Windows XP is on NTFS and non on FAT32.
    If it's on FAT32, yous can continue the steps below.
18. Open up any folder that wasn't created at the current time, e.m. when you logged into the computer at this session.You can check this past right clicking on the starting time folder and check its appointment.The title format of these folders is something like this:

    _restore{87BD3667­3246­476B­923F­F86E30B3E7F8}

19. Open any              RP              binder in that folder, due east.thousand. RP1, and get to              Snapshot.These are called Restore Points. Here is an instance of path:

    C:\Organisation Volume Information\_restore{D86480E3­73EF­47BC­A0EB­A81BE6EE3ED8}\RP1\Snapshot

20. From the Snapshot binder, copy the following files to C:\Windows\Tmp
    • _REGISTRY_MACHINE_SAM
    • _REGISTRY_MACHINE_SYSTEM
    • _REGISTRY_MACHINE_SOFTWARE
    • _REGISTRY_MACHINE_SECURITY
    • _REGISTRY_USER_.DEFAULT
21. In one case copied, rename these files in the Tmp binder (non the Snapshot folder) as shown below:
    • Rename _REGISTRY_USER_.DEFAULT to DEFAULT
    • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
    • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
    • Rename _REGISTRY_MACHINE_SYSTEM to Arrangement
    • Rename _REGISTRY_MACHINE_SAM to SAM
22. Restart your computer and kick from the CD again
23. Press R to access Recovery Console
24. Once Control Prompt has loaded, type the post-obit commands, each at a time, press Enter after each control:

    del c:\windows\system32\config\sam del c:\windows\system32\config\security del c:\windows\system32\config\software del c:\windows\system32\config\default del c:\windows\system32\config\organization

    

    Deleting current registry hives

    Continue with these commands:

    copy c:\windows\tmp\software.bak c:\windows\system32\config\software copy c:\windows\tmp\system.bak c:\windows\system32\config\system copy c:\windows\tmp\sam.bak c:\windows\system32\config\sam copy c:\windows\tmp\security.bak c:\windows\system32\config\security re-create c:\windows\tmp\default.bak c:\windows\system32\config\default

    

    Restoring registry hives from the backup

25. Type exit, press Enter, remove your CD:

    get out

26. Restart your computer
27. Once restarted, get to Organization Restore and click on Restore to a previous point:
    • Click Kickoff
    • Get to All Programs
    • Select Accessories
    • Then select Tools
    • Click Organisation Restore
28. Follow the System Restore magician steps

Set up a corrupt registry in Windows Vista

To prepare a corrupt registry in Windows Vista, you can attempt whatever of the post-obit:

• Run Startup Repair
• Perform an Upgrade Install
• Copy backup files from the RegBack folder using Control Prompt

Startup Repair

To run Startup Repair, follow these steps:

1. Insert the original Windows Vista DVD in the disc tray
2. Kick from the DVD
3. Choose a linguistic communication and keyboard layout
4. At the Welcome screen, click on Repair your reckoner

   

   Windows Vista Repair Your Calculator Menu

5. Choose your operating system from the list
6. Click Next
7. At the System Recovery Options window, click on Startup Repair

   

   Windows Vista Organisation Recovery Options

8. Follow the instructions to complete the process

Upgrade Install

An Upgrade Install may fix a corrupt registry as it will install Windows Vista again without affecting your personal files.

While an Upgrade Install procedure shouldn't touch your personal files, backup your files earlier yous continue.

Earlier you continue with the prepare of instructions below, please note:

• If your Windows Vista has SP1 (Service Pack i) installed, your original installation DVD besides must have SP1.
• If your Windows Vista has SP2 (Service Pack 2) installed, your original installation DVD too must take SP2.

The instructions are:

1. Log into Windows Vista as an Administrator
2. Insert the Windows DVD in the disc tray

   Practise not boot from the DVD at kicking. You must insert the Windows Vista DVD while yous're logged in as an Administrator in Windows Vista.

3. If AutoPlay doesn't open the DVD automatically, go to My Computer and double­-click on the DVD bulldoze
4. Click Install Now

   

   Windows Vista Repair Your Computer Card

5. Select Do no get the latest updates for installation.After you perform the Upgrade Install, you tin manually update Windows Vista with the latest updates available.
6. Do non type the license key
7. Exit the Automatically activate Windows when I'thousand online pick unchecked
8. Click Next
9. At the Exercise you desire to enter your product key now? question, select No
10. Select what blazon of Windows Vista you purchased and then check the I have selected the edition of Windows that I purchased option
11. Click Next
12. Click Upgrade
13. Follow any instructions left and remove the DVD

After you lot performed the Upgrade Install, add the license key:

1. Boot into Windows Vista
2. Open Control Panel
3. Get to Organisation
4. At the Windows activation department, click Alter product key

Command Prompt

To replace the registry in a Windows Vista organisation, follow these steps:

1. Open Command Prompt
2. Type C:\, where C: is the letter of the drive where your Windows Vista is installed:

   C:\

3. Press Enter
4. Type cd Windows\System32\Config
5. Press Enter
6. Type MD Temp and printing Enter
7. Type the following commands and press Enter after each:

   re-create BCD­Template Temp copy COMPONENTS Temp copy DEFAULT Temp copy SAM Temp copy SECURITY Temp copy SOFTWARE Temp copy Arrangement Temp

   

   Backing up the registry hives

8. Type the following commands and press Enter after each:

   ren BCD­Template BCD­Template.bak ren COMPONENTS COMPONENTS.bak ren DEFAULT DEFAULT.bak ren SAM SAM.bak ren SECURITY SECURITY.bak ren SOFTWARE SOFTWARE.bak ren Organisation Arrangement.bak

   

   Renaming the old the registry hives

9. Then type these commands, one by 1, and press Enter afterward each:

   copy Regback\BCD­Template BCD­Template copy Regback\COMPONENTS COMPONENTS copy Regback\DEFAULT DEFAULT copy Regback\SAM SAM copy Regback\SECURITY SECURITY re-create Regback\SOFTWARE SOFTWARE copy Regback\SYSTEM System

   

   Restoring the registry hives

Fix a corrupt registry in Windows 7

To fix a corrupt registry in Windows 7, you tin can try any of the following:

• Run Startup Repair
• Perform an Upgrade Install
• Copy fill-in files from the RegBack binder using Command Prompt

Startup Repair

To run Startup Repair, follow these instructions.

Method #1

1. Insert the original Windows 7 installation DVD in the disc tray
2. Reboot the reckoner
3. Press whatsoever cardinal when it says "Press whatsoever fundamental to boot from CD or DVD.."
4. Select a language and keyboard option
5. Click Repair your computer
6. Select your operating arrangement
7. Cull Startup Repair

   

   Windows 7 Organisation Recovery Options Screen

8. Follow the wizard instructions to complete the procedure

Method #2

1. Restart your computer
2. Press the F8 primal several times during booting before the Windows 7 logo appears
3. At the Avant-garde Options screen, select Repair your computer

   

   Advanced Boot Options on Windows 7

4. Select a keyboard and language
5. Select Startup Repair

   

   Windows 7 Arrangement Recovery Options Screen

6. Follow the magician instructions to consummate the process

Upgrade Install

An Upgrade Install may gear up a corrupt registry as this option volition install your Windows 7 again without affecting your personal files.

While Upgrade procedure shouldn't impact your personal files, backup your files before you lot go along to make certain.

The instructions are:

1. Kicking into Windows seven

   Important: You need to run the Windows vii DVD while you're logged in Windows vii.

2. Insert the Windows vii DVD
3. If AutoPlay doesn't open automatically, open the DVD directly from Calculator
4. Click Install Now
5. Make certain the I want to assist brand Windows installation better option is unchecked
6. Click Go online to become the latest updates for installation
7. Accept the license terms
8. Click Next
9. Click Upgrade
10. Uncheck the Automatically activate Windows when I'm online choice
11. Click Side by side
12. Click Enquire me later on at the Aid protect your computer and better Windows automatically screen. You can install updates for your Windows 7 once this procedure is done.
13. Continue with the instructions to complete the upgrade

Once this process is done, get and activate your license central:

1. Go to Control Panel
2. Go to Arrangement
3. At the Windows activation section, click Change production key

Control Prompt

To replace the registry in a Windows vii arrangement, follow these steps:

1. Open Command Prompt
2. Type C:\, where C: is the letter of the drive where your Windows 7 is installed
3. Press Enter
4. Blazon cd Windows\System32\Config
5. Press Enter
6. Type Doctor Temp and printing Enter
7. Type the following commands and press Enter:

   copy BCD­Template Temp copy COMPONENTS Temp copy DEFAULT Temp copy SAM Temp copy SECURITY Temp copy SOFTWARE Temp copy SYSTEM Temp

   

   Bankroll up the registry hives

8. Type the following commands and press Enter later each:

   ren BCD­Template BCD­Template.bak ren COMPONENTS COMPONENTS.bak ren DEFAULT DEFAULT.bak ren SAM SAM.bak ren SECURITY SECURITY.bak ren SOFTWARE SOFTWARE.bak ren SYSTEM SYSTEM.bak

   

   Renaming the old the registry hives

9. Then blazon these commands, i by one, and press Enter after each:

   copy C:\Windows\System32\Config\Regback\BCD­Template C:\Windows\System32\Config\BCD­Template copy C:\Windows\System32\Config\Regback\COMPONENTS C:\Windows\System32\Config\COMPONENTS re-create C:\Windows\System32\Config\Regback\DEFAULT C:\Windows\System32\Config\DEFAULT copy C:\Windows\System32\Config\Regback\SAM C:\Windows\System32\Config\SAM copy C:\Windows\System32\Config\Regback\SECURITY C:\Windows\System32\Config\SECURITY copy C:\Windows\System32\Config\Regback\SOFTWARE C:\Windows\System32\Config\SOFTWARE copy C:\Windows\System32\Config\Regback\SYSTEM C:\Windows\System32\Config\Arrangement

   

   Restoring the registry hives

Fix a corrupt registry in Windows 8 or 8.1

To repair a corrupt registry in Windows 8 or 8.1, you accept these options:

• Run Automatic Repair
• Refresh. The Refresh option will not touch on your files. Windows 8 will reinstall whatever applications you installed and create a copy of these applications on your desktop, simply backup your data before you practice a refresh.
• Reset. A Reset option will remove all your personal files and delete any settings or configuration yous did on your estimator.

Run Automatic Repair

To run Automatic Repair which will attempt to fix a decadent registry on your Windows eight or 8.1 system, follow these steps:

1. Open up the Settings console
2. Go to General
3. At the Advanced Startup panel, click Restart now

   

   Windows eight Avant-garde Startup

4. At the Cull an option screen, click Troubleshoot
5. At the Advanced Options screen, click Automatic Repair
6. Choose an account and login, when prompted to do then
7. Automatic Repair should now start and your reckoner may reboot during this process

Windows 8 Advanced Startup screen

Refresh

To perform a Refresh on your Windows viii or Windows 8.1 system, follow these steps:

1. Get to the Settings panel
2. Go to Alter PC Settings
3. Click Update and recovery
4. Click Recovery
5. At the Refresh your PC without affecting your files section, click Become started
6. Follow the instructions to complete the refresh procedure

Windows 8 Recovery Screen

Reset

To practice a Reset of your Windows 8 or Windows eight.1 organisation, follow these steps:

A Reset process will erase personal information from your computer. Backup your files before you keep.

1. Go to Settings > Change PC Settings
2. Click Update and recovery
3. Click Recovery
4. At the Remove everything and reinstall Windows department, click Become started
5. Follow the instructions to complete the refresh procedure

Windows viii Recovery Screen

Set a corrupt registry in Windows 10

To repair a corrupt registry in Windows ten, you have these options:

• Run Automatic Repair
• Refresh. The Refresh option volition not affect your files. Windows 10 will reinstall whatsoever applications you installed and create a re-create of these applications on your desktop, simply backup your data before y'all do a refresh.
• Reset. A Reset option will remove all your personal files and delete whatsoever settings or configuration y'all did on your computer.

Run Automated Repair

To run Automatic Repair which will attempt to fix a corrupt registry on your Windows 10 system, follow these steps:

1. Open the Settings console
2. Go to Update & Security
3. At the Recovery tab, click Avant-garde Startup ->Restart now
   

   

   Windows x Advanced Startup

4. At the Choose an selection screen, click Troubleshoot
5. At the Advanced Options screen, click Automated Repair
6. Choose an account and login, when prompted to exercise so
7. Automatic Repair should now start and your computer may reboot during this process'

Windows 10 Avant-garde Startup screen

Refresh

To perform a Refresh on your Windows 10 system, follow these steps:

1. Go to the Settings console
2. Go toUpdate and Security
3. Click Recovery
4. ClickGet Started
5. At the Reset This PC section, click Become started
6. Click Proceed My Files
7. Follow the instructions to complete the refresh procedure

Windows 10 Recovery screen

Reset

To do a Reset of your Windows 10 organization, follow these steps:

A Reset procedure will erase personal data from your estimator. Fill-in your files earlier you go on.

1. Go to the Settings panel
2. Go toUpdate and Security
3. Click Recovery
4. ClickGet Started
5. At the Reset This PC section, click Go started
6. ClickRemove Everything
7. Follow the instructions to complete the refresh procedure

Windows x Recovery screen

Troubleshooting

Registry permissions in Windows XP

In Windows XP (only the Professional version), the permissions of the registry tin block yous from editing certain keys.

Method #i

To unblock this and ready the permissions, follow these steps:

1. Open Command Prompt
2. Type this command:

   secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose

3. Press Enter

Fixing permissions with secedit

Method #ii

If Method #one doesn't piece of work to set the permissions, try these steps instead:

1. Download SubInACL Tool from Microsoft directly: http://world wide web.microsoft.com/en-us/download/details.aspx?id=2351…
2. Run the .exe file
3. Open up Command Prompt
4. Blazon this control and printing Enter:

   cd "%ProgramFiles%\Windows Resource Kits\Tools

5. Enter the following commands and press Enter afterward each:

   subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f  subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f subinacl /subdirectories %SystemDrive%\ /grant=administrators=f /grant=organization=f

6. Restart the reckoner

Fixing permissions with SubInAcl

More Information

Support Links

• Like shooting fish in a barrel Recovery Essentials for Windows – our repair and recovery deejay.

  It's an easy-to-apply and automated diagnostics disk. It's bachelor for Windows 8, Windows 7 and Windows Vista. It's also available for Windows XP and Windows Server.

  Read more at Windows Recovery Disks.

• The NeoSmart Support Forums, member-to-fellow member technical support and troubleshooting.
• Get a discounted price on replacement setup and installation discs: Windows XP, Windows Vista, Windows 7, Windows eight, Windows 10.

Applicable Systems

This Windows-related knowledgebase article applies to the following operating systems:

• Windows XP (all editions)
• Windows Vista (all editions)
• Windows 7 (all editions)
• Windows eight (all editions)
• Windows 8.1 (all editions)
• Windows 10 (all editions)

Suggest an edit

westablat1958.blogspot.com

Source: https://neosmart.net/wiki/fix-registry/

Share this post